> cat 7 cable

PI DATE : Dec04CATEGORY 5 (CATS) ETHERNET PIN USAGE Data: 1,2,3,6 Power: 4,5,7,8 LEDS: Power (Base Unit) , Power (Terminal Unit) VOLTAGE (POWER SUPPLY): Input: 48VDC, 400mA Output: 5VDC or 12VDC (DIP switch selectable) xVOLTAGE (BASE&TERMINAL UNIT) Base Unit Input: 48V DC, 400mA Terminal Unit Output: 5V DC, 2.5A or 12V DC, 1A DIMENSIONS : L x W x H 52 x 80.9 x 28.0mm * The DWL-P200 delivers both data and electrical power to Ethernet- enabled devices using a single Ethernet cable* The DWL-P200 simplifies your installation of Ethernet-enabled devices, such as an Internet camera or wireless access points by allowing you to place it beyond the range of standard power outlets.* With the DWL-P200 Power over Ethernet (PoE) Adapter, both power and data can be transmitted up to 328 feet (100m)* using standard Ethernet cabling with virtually no reduction in data throughput

PI DATE : October 2005LAN CONNECTION: Max Cat 5 cable length: 100 m from switch to device Type: RJ-45 1 x 10/ 100BASE-TX To NetworkDEVICE CONNECTION: Max Cat 5 cable length: 100 m from switch to device Type: RJ-45 ; 1 x 10/ 100BASE-TX To DeviceELECTRICAL : I/ P vol (supplied by Ext power supply) 48VDC 10%, 18 watts Output voltage: 48 VDC Input current: .380A ; Output current: .320ADIMENSIONS : 139 x 54 x 34 mm* 2 Power Status & Device Connectivity* Requires Cisco Aironet power supply, 48 VDC 5%, 18 watts* Injects power into two unused pairs in the Category 5 cable: 4 and 5 (negative) and 7 and 8 (positive* Cisco Aironet Power Injector for Cisco Aironet 1100 and 1200 Series Access points* Cisco Aironet power injectors provide sufficient power for each possible configu of the access point* The power injectors are used in combination with the 110 to 220 VDC power supply that is shipped with the Cisco Aironet 1200 Series access point platform and preconfigured bundles